SYSTEM 2000 PIVOT ARM AWNINGS
The System 2000 Pivot Arm Awning is the small brother of the System 6000. It is most commonly tape operated.
|
Tape Operation
With Tape Operation the awning skin is rolled up by means of tape on a spool connected to the end of the roller tube. The arm incorporates a spring that applies tension to the fabric. When operated internally this awning can be mounted in inaccessible positions such as upper levels.
Gear Operation
With gear operation the awning skin is rolled up by means of a crank mounted inside the headbox on the end of the roller tube. A detachable crank handle is used to wind the awning up or down. |
 |
|
Components
The system is based on a roller tube with a keyway groove into which fabric is fitted. The roller assembly is mounted in an attractive, robust head box that can be mounted between roller mounting brackets.
The bottom rail is a five-sided colourcoated steel profile tube with a keyway groove, into which the bottom of the awning skin is fitted.
The System 2000 Awning provides great flexibility in mounting as headbox installation brackets and arms can be positioned at any point along the awning. |
 |
