SYSTEM 6000 AWNINGS
The System 6000 Awning is operated by removable crank handle or electric motor.
The arm assemly moves outward and down from the roller tube as it pivots from its hinge bracket. This feature allows the awning to be adjusted for the sun angle at different times of the day while still maintaining a view.
The brackets for the fabric tube can be either face, reveal or top fixed and must coincide with a stud if it is a timber or blue board clad building. If fitted to studs the front profile must be extended on the control side to match the arm position.
The arms may be installed at any position along the front profile. The arms contain strong springs to hold the fabric under tension to withstand wind.
|
The awning arms and front bar are manufactured from drop-forged aluminium, 6061 extruded aluminium profiles, powder coated white with marine grade 316 stainless steel nuts and bolts.
An optional colourbond headbox protects the fabric when the awning is retracted.
Specifications:
Maximum width: 5000mm
Maximum projection: 1500mm
Maximum Drop: 3000mm
|
|
A similar awning with anodised aluminium extrusions called the Robusta Awning is also available for use where a clear anodised finished is required.
We offer the largest range of textiles on the market - all with a five year warranty against ultraviolet degradation. The choice includes:
|
 |
 |
System 6000
Solid...robust...
retractable awning
|
